Improved indoor environment through optimised ventilator and furniture positioning: A case of slum rehabilitation housing,Mumbai, India

This study optimized the ventilator and furniture location of a tenement unit in a low-income urban habitat to obtain maximum experiential indoor environmental quality (e-IEQ) over the breathing zone. Hypothetical interior layouts using a combination of the two design parameters of ventilator location and bed position were generated for optimizing the design layout. This layout could promote maximum indoor airflow and minimum indoor air temperature and contaminant concentration. In this study, an improved indoor environment is hypothesized to be attainable through improved natural ventilation and thermal performance in the occupied zones. A sequential methodology involving “parametric design modeling–computational simulation–multiobjective optimization–multicriteria decision making”-based framework was selected. Results exhibited that the currently designed tenement unit had a poor indoor environment, whereas the hypothesized iterated layout “optimized design layout, scenario 3 (ODL 3)” derived from the optimization and decision-making algorithm performed effectively in providing e-IEQ. An increase in experiential indoor air velocity by 0.2 m/s and a decrease in temperature by 2 °C were observed over the monitoring point in the ODL 3 considering the existing scenario. Therefore, this study can find a way toward the development of sustainable habitat design guidelines under upcoming slum redevelopment policies across the nation.     

Optimal approximation of asymmetric type fractional-order bandpass Butterworth filter using decomposition technique

In this letter, the optimal rational approximation of fractional-order bandpass Butterworth filter (FOBBF) is presented. The transfer function of the FOBBF is decomposed into a multiplication of first-order and second-order terms. As a result, the design stability conditions can be easily satisfied using only the variable boundary constraints. The proposed technique generalizes the symmetric fractional-order roll-off characteristic as only a special case of the asymmetric one. Several examples are presented to validate the modeling efficacy.     

开关磁阻直线电机的设计及其推力优化

设计了一种开关磁阻直线电机,使用JMAG软件对其进行了仿真和优化。进行了推力公式的推导,研究了导通顺序和初始位置对电机推力的影响,并分析了三种典型情况的磁力线分布。对电机的定子和动子的齿部和轭部高度、宽度及铁耗进行仿真优化,得出了最优参数。将有取向硅钢应用于该电机,研究了推力与轧制角的关系,并与使用普通硅钢的开关磁阻直线电机进行了对比,推力有一定提升。提出在动子齿部开切向槽的方案,结果表明,开切向槽对推力的影响较小,并能显著减小推力波动。     

Smart work packaging-enabled constraint-free path re-planning for tower crane in prefabricated products assembly process

Lack of constraint-free crane path planning is one of the critical concerns in the dynamic on-site assembly process of prefabrication housing production (PHP). For decades, researchers and practitioners have endeavored to improve both the efficiency and safety of crane path planning from either static environment or re-planning the path when colliding with constraints or periodically updating the path in the dynamic environment. However, there is a lack of approach related to the in-depth exploration of the nature of dynamic constraints so as to assist the crane operators in making adaptive path re-planning decisions by categorizing and prioritizing constraints. To address this issue, this study develops the smart work packaging (SWP)-enabled constraints optimization service. This service embraces the core characteristics of SWP, including adaptivity, sociability, and autonomy to achieve autonomous initial path planning, networked constraints classification, and adaptive decisions on path re-planning. This service is simulated and verified in the BIM environment, and it is found that SWP-enabled constraints optimization service can generate the constraint-free path when it is necessary.     

机械结构分层优化技术研究进展

复杂机械结构优化设计一般表现为多目标、多约束、多参数的优化问题,所以复杂结构优化设计过程通常存在计算复杂、不易收敛等困难。分层优化技术是复杂结构优化设计的一种有效途径,通过将优化问题中复杂的约束、设计变量以及功能目标合理分解为若干子层问题进行求解,然后通过协调得到复杂机械结构整体优化问题的结果。文章对机械结构分层优化技术的理论、应用研究现状进行了总结并探讨了其关键技术环节及发展趋势。     

基于最小包容区域的球度误差评定方法

针对球度误差评定方法存在原理误差或模型误差,提出了一种符合最小包容区域定义的球度误差评定方法,即将几何搜索逼近算法与基于最小包容区域法的球度误差评定的几何结构和定义结合起来的准确评定方法。对仿真数据和其他文献中的数据进行了评定。所提方法与其他方法的评定结果表明,所提方法可以准确地找到最小包容区域球的球心并给出球度误差的精确解。     

Multiemotional product color design using gray theory and nondominated sorting genetic algorithm-III

When users select products, they consider the emotional experience resulting from the color of the product. However, the emotional demands of users for product color are multidimensional and diverse. It is very important yet difficult to accurately grasp multiemotional image requirements and effectively convert them into design elements. Therefore, multiemotional product color design (MEPCD) has become a very important and challenging research topic. In this article, a novel MEPCD system using gray theory (GT) and nondominated sorting genetic algorithm-III (NSGA-III) is proposed to effectively solve the MEPCD problem. First, the image perception spaces of users, which exist in different emotional dimensions, were collected using factor analysis and the semantic differential technique. Then, GT was used to establish a multidimensional emotional product color image evaluation model. Finally, NSGA-III was used to optimize and design a multiemotional color scheme for a product. Furthermore, according to actual conditions, an MEPCD system was established based on the proposed method. The design case study shows that the method and design system proposed in this article have a certain range of applicability and can effectively improve the practicality of MEPCD.     

Allocation and sizing of battery energy storage system for primary frequency control based on bio-inspired methods: A case study

This paper presents a new procedure for optimal allocation and optimal sizing of a battery energy storage system (BESS) for primary frequency support in an isolated power system. For the BESS allocation, a transmission bus system with larger frequency decline is recognized and the BESS sizing is performed by a constrained optimization strategy based on a new modified metaheuristic, called Developed Harris Hawks Optimization (DHHO). The simulation results of the suggested DHHO are compared with Bat Optimization Algorithm (BOA) and Genetic Algorithm (GA) from the literature to show the method efficiency. The final results showed higher precision with lower required iterations for the suggested DHHO method. Also, the proposed DHHO gives lower investment costs for BESS with lower power and energy requirement toward the other compared methods.     

助燃空气对乙烯裂解炉NOx排放的影响

乙烯裂解炉内复杂物理化学过程耦合模拟与优化能够满足乙烯装置对高效率、低污染和低成本的设计和操作要求，对提高乙烯工业的竞争力具有重要意义。针对简单燃烧机理难以准确预测炉膛燃烧生成NO_x浓度分布的弊端，提出了在裂解炉使用更准确的简化GRI-Mesh 3.0机理结合涡耗散概念(EDC)模型的方法，并对Sandia Flame D的燃烧过程进行计算流体力学(CFD)模拟，验证了此耦合模型的可靠性。在已建立的燃烧模型的基础上，研究了助燃空气对降低裂解炉NO排放的影响，结果表明：在满足裂解炉热效率的情况下，空气预热温度为300~600 K、过量空气系数为1.1时降低NO的效果最佳。